







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat It Costs to Reface Kitchen Cabinets in Arlington, TX
Refacing kitchen cabinets in Arlington typically runs $4,500 to $9,000 for the face work itself, plus a remediation line of $1,200 to $2,800 if your home was built before 1980 and the pre-permit inspection flags original particle-board boxes or aluminum branch wiring. Rowan Construction Group Arlington quotes both lines in writing before anyone picks up a tool. For an exact number on your kitchen, call (844) 761-7521. Estimates are free, and a second opinion on a competitor’s written quote costs nothing either.
Here’s the thing a lot of homeowners in Arlington run into: a refacing quote from a Dallas or Fort Worth crew may start at $4,500, but it was priced for a house that doesn’t need a pre-permit inspection. If your kitchen was built before 1980, the city’s building department will flag it before anyone touches a cabinet box.

Why Arlington Refacing Quotes Grow Before the First Door Goes Up
This isn’t scope creep in the usual sense. It’s the difference between a quote written for a 1990s suburb and a quote written for a 1968 ranch off Pioneer Parkway with original cabinets and aluminum-wired appliance circuits.
Arlington’s building department enforces a strict pre-permit inspection requirement for any work on pre-1980 homes. That inspection routinely surfaces two things that stop a refacing job cold:
- Particle-board cabinet boxes that can’t hold new veneer or new hinge hardware. The old face may look fine. The box behind it crumbles when a screw bites into it.
- Aluminum branch wiring at the appliance circuits. Aluminum expands and contracts differently than copper, and the connections loosen over time. An inspector won’t sign off on cosmetic work until it’s corrected.
Most refacing quotes you’ll collect don’t include either line. You find out about it after demo, which is the worst possible time to hear a new number. We’d rather show you both costs on the page so you can compare like with like. That’s the whole reason we break a refacing price into two line items: the face work and the remediation.
The Two-Part Cost Structure, Line by Line
Below is how a refacing number breaks down for an Arlington kitchen. These are the same ranges we use across our Kitchen Remodeling work, kept consistent so you can compare one page to the next.
| Line item | Typical range |
|---|---|
| Refacing labor and materials (doors, veneer, drawer fronts, hardware) | $4,500 - $9,000 |
| Pre-permit inspection remediation (particle-board box replacement or aluminum-circuit correction) | $1,200 - $2,800 |
| Full cabinet installation, if boxes are beyond refacing | $4,000 - $13,000 |
| Countertop installation, if you replace tops during the same job | $2,000 - $6,500 |
| Backsplash installation | $800 - $2,500 |
For context, a full Kitchen Remodeling in Arlington runs $14,000 to $45,000, and a smaller kitchen remodel lands between $9,000 and $20,000. Refacing sits well below those numbers because the layout, plumbing, and floor stay put. But it only stays cheap if the remediation line is honest from the start.

KraftMaid and Wellborn Doors, Priced to the Dollar
The door you choose drives most of the refacing cost, so we quote it as its own line. Rowan sources across fifty-plus vetted brands, and two of the cabinet names we work with most are KraftMaid and Wellborn. Both thermofoil door lines get priced to the dollar in a written quote before any tool is picked up.
That means you see door cost, hinge hardware cost, and drawer-front cost as separate numbers rather than one blended figure you can’t audit. When a quote reads “$6,200 to reface,” you have no way to know whether you’re paying for quality doors or paying for labor padding. When it reads door cost, hardware cost, drawer-front cost, you can compare two quotes line by line and see exactly where the difference lives.
Our technicians have up to 19 years of experience, and the crews are background-checked and uniformed. A live person answers calls around the clock. Every visit includes a documented photo record as a standard deliverable, not an upgrade, so you get evidence of what was found at rough-in and what was done at completion.
If the Inspector Finds a Box That Can’t Take New Veneer
Sometimes the inspection finds a cabinet box that simply won’t support new veneer. The particle board has swelled, or the structure is compromised. In those cases the box gets replaced, and the cost for that replacement is real.
Here’s the discipline that keeps it from becoming a surprise: no work proceeds on a change until the change order is signed. If the inspector flags a box, you get a written change order for the box replacement before that cost is incurred. Nothing gets added after demo and billed later. That signed-change-order approach is the reason our projects finish within a few percent of the number you agreed to, across the 4,000-plus jobs we’ve delivered.
Under Clause 1 of The Haven Standard, the price is written before anyone starts. That holds on every trade, from refacing through home additions, and it’s why “call for a quote” isn’t an option here.
Why the Peel-and-Stick Kits Fail in Arlington’s Climate
DIY refacing kits look like an easy way to skip the labor line. In Arlington they tend to fail within 18 to 36 months, and the failure is predictable enough to plan around.
Arlington’s climate swings hard. Wet springs push indoor humidity up, then 100°F dry summers pull it back down. Peel-and-stick veneer can’t handle that cycling. On south- and west-facing cabinets, where the afternoon sun hits the doors, the adhesive loses its grip and the veneer lifts at the edges. Kit vendors don’t disclose that failure mode because their product wasn’t engineered for a DFW climate. A properly applied veneer with the right adhesive and substrate prep handles the swing; a kit adhesive generally doesn’t.
Common Scenarios We See in Arlington Kitchens
A few patterns come up again and again in the older tract homes across north Arlington and the east side:
- The 1960s-70s east-side ranch: original cabinets, aluminum appliance wiring, slab-on-grade. Refacing is doable, but the inspection and remediation line shows up almost every time.
- The Pier-and-beam ranch near 76013/76014: foundation movement over the years has tweaked cabinet boxes slightly out of square, which affects door alignment. We check square before quoting doors.
- The “looks fine until demo” kitchen: the face is solid but the boxes are swollen particle board. We catch it at inspection rather than after the old doors come off.
Because the housing stock here is dominated by single-story brick ranches and 1970s-80s tract homes with original materials, this part of DFW sees more remediation than newer suburbs. It’s not a sales pitch. It’s the reality of the age of the homes.
The 365-Day Done Right Promise on Refacing Work
Refacing is documented with a photo record at rough-in and at completion. If a door delaminates or a hinge fails within the year, that’s a warranty call, not a negotiation. The 365-Day Done Right Promise means if it isn’t done right, we make it right, and that promise is backed by The Haven Standard, not a handshake.
FAQs
Refacing kitchen cabinets in Arlington typically costs $4,500 to $9,000 for the face work, plus $1,200 to $2,800 for pre-permit inspection remediation on pre-1980 homes. Together that lands most jobs between roughly $5,700 and $11,800. Call (844) 761-7521 for an exact quote on your kitchen; estimates are free.
Refacing is usually cheaper than full replacement because the cabinet boxes and layout stay in place. Refacing runs $4,500 to $9,000 in Arlington, while full cabinet installation runs $4,000 to $13,000 and a complete kitchen remodel runs $14,000 to $45,000. The math shifts only when the boxes themselves are compromised. Call (844) 761-7521 and we’ll tell you which side of that line your kitchen sits on.
Yes, and it’s done often, but the pre-permit inspection has to clear the boxes and appliance wiring first. If it flags particle-board boxes or aluminum branch wiring, those get corrected before any cosmetic work, and you sign a change order before that cost is incurred. Call (844) 761-7521 to schedule the inspection walk-through.
Usually not. Arlington’s wet-spring and 100°F-summer swing causes kit veneer to lift within 18 to 36 months, especially on south- and west-facing cabinets. Properly applied veneer with the right substrate prep and adhesive holds up far better. Call (844) 761-7521 to talk through materials before you buy a kit.
Get Your Written Refacing Price Today
Bring us a competitor’s written estimate and we’ll review it line by line at no charge. You’ll see whether the remediation line is in it, and whether the door cost is honest. Call (844) 761-7521 for a free estimate with a flat, written price before any work starts.
Written by the team at Rowan Construction Group Arlington, serving Arlington, TX.
What Our Customers Say
"They found an old septic line under the driveway run and stopped, documented it, and re-quoted before continuing."
- Xavier L."Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R."Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F.












