A Rowan company - serving Arlington, TX
A remodeled primary bathroom with a soaking tub and a walk-in shower

The Complete Bathroom Remodeling Guide for Arlington Homeowners

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Arlington

Last updated November 18, 2026

A remodeled hall bathroom with patterned floor tile and painted walls
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A garage converted into a guest room and home office
New architectural shingles with a clean valley
A new casement window over a kitchen sink
A new white vinyl privacy fence with a double gate
New painted shaker cabinets with an organized deep drawer
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

The Complete Bathroom Remodeling Guide for Arlington Homeowners

Most bathrooms in Arlington look fine until someone opens a wall. If your house went up before 1980, there’s a strong chance it has a cast-iron drain stack and galvanized supply lines behind that tile. Cast iron corrodes from the inside and clogs at the low points; galvanized steel narrows with scale until the pressure at the shower head drops to a trickle. Those materials change how a remodel gets roughed in, and a bid that never looked behind the wall hasn’t priced them. That gap between a bathroom priced on assumptions and one priced on what’s confirmed to be there is routinely $4,000 to $9,000. This guide shows you how to find out what’s actually in your walls before you accept any bid.

Call (844) 761-7521

Quick Answer

Bathroom remodeling in Arlington runs from roughly $8,000 to $18,000 for a cosmetic refresh (fixtures and surfaces, plumbing stays put), $18,000 to $38,000 for a partial remodel that updates the rough-in while the layout stays, and $40,000 to $75,000 and up for a full gut-and-reconfigure. The single biggest driver of which range you land in is the condition of the existing plumbing and electrical, and that can’t be known without a pre-bid inspection. Get that confirmed before you sign.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Table of Contents

The Three Tiers of Bathroom Remodel, Priced

The word “remodel” hides three very different jobs with three very different price tags. Knowing which tier you’re actually buying keeps you from comparing apples to bid sheets that were never apples.

  • Cosmetic – $8,000 to $18,000. New vanity, faucets, mirror, paint, tile over existing surfaces or a light re-tile, and a new exhaust fan. Nothing moves. The rough-in stays exactly where it is, which is why this tier is priced tight. A 1990s-2000s Arlington bathroom in good structural shape qualifies.
  • Partial – $18,000 to $38,000. Same footprint, but the plumbing rough-in gets updated: new valve, new supply lines where the old galvanized shows scale, new drain connections. This is the tier most 1970s and early-80s homes in north Arlington actually need once you open the wall and find crumbling cast iron.
  • Full gut-and-reconfigure – $40,000 to $75,000 and up. Walls move, the drain relocates, the tub becomes a curbless shower, the layout changes entirely. New substrate, new membrane, new everything, plus the labor and inspections of moving drains and walls.

What drives the difference isn’t the finish material – it’s the labor and the unknowns behind the surface. A $600 faucet costs the same whether it’s the only change or the last step of a gut job. The plumbing rough-in is where the number swings. And that’s exactly why the next section matters.

What a Contractor Must Look At Before Pricing

A bid written from the driveway is a guess dressed as a number. Before anyone can quote your Arlington bathroom honestly, they need to look at five things inside the room. If a bid arrives without these checked, it’s priced on assumptions, and the change orders come later.

  1. Access panel condition. Is there a panel behind the tub or in a closet to reach the valve? If not, cutting one is a real cost and a real decision made at the bid stage, not mid-demo.
  2. Vent stack size. The existing vent stack needs to be sized right for the fixtures you’re adding. Going from one sink to two, or tub to shower, changes venting requirements. This is visible and must be seen.
  3. Floor joist depth. A curbless shower pan needs the joist structure to recess the drain and slope. If the joists are shallow or have been notched for something else, curbless may cost more or may not be feasible without structural work. This is a look-and-measure item.
  4. GFCI circuit presence. Bathrooms require ground-fault protection. An older Arlington home may have no GFCI on that wall, or no dedicated circuit, which means adding one. That’s electrical work and it’s priced before demo.
  5. Supply line material and drain material. Galvanized or cast iron behind the wall means the rough-in plan changes. This is the item that produces the $4,000 to $9,000 swing.

Once we’ve looked at all five, the bid reflects what’s there. Under Clause 1 of The Haven Standard, we put the price in writing before any work starts – and the reason that number holds is that we knew the rough-in before we wrote it.

Arlington Permits and the Inspection Sequence

Not every Arlington bathroom remodel needs a permit, and knowing the line saves you a surprise from an inspector or a buyer’s realtor later. A permit is required whenever you relocate a drain, relocate or remove a wall, or touch the electrical panel. A pure surface refresh – paint, a new vanity on existing plumbing, tile over existing tile – generally does not require one, though your contractor should confirm against current City of Arlington requirements before signing.

For a permitted remodel, the sequence typically runs like this:

  1. Rough-in inspection. After the walls are open and the plumbing and electrical rough-in is visible, before anything gets closed up. This is why you don’t cover walls early.
  2. Framing and structural check if walls moved, done before rough-in closes.
  3. Insulation and vapor barrier inspection where required.
  4. Final inspection. After fixtures, surfaces, and the exhaust fan are installed and the room is finished.

A permitted remodel in Arlington leaves a paper trail an appraiser can see and a future buyer can ask about. Skipping a permit on drain relocation can mean an open permit shows up at the next sale, which is a mess nobody wants. The permitted path is the honest one, and it’s priced into the job from the start.

What to Specify: Substrate, Valves, and Ventilation

The finish gets the attention; the layers under it decide whether the room still looks good in ten years. Here’s what to name by brand or standard in your scope.

Tile substrate. Cement board is the traditional backer for wet areas; foam board – brands like Schluter Kerdi-Board and Wedi – is lighter, waterproofs in one layer, and is common in modern Arlington remodels. Either works when installed to the manufacturer’s spec with the correct membrane and adhesive. The point is that the substrate is named in the scope, not left to “whatever’s on hand.”

Shower valve. A pressure-balance valve protects against scald when someone flushes a toilet elsewhere in the house. A thermostatic valve holds a set temperature more precisely, which costs more. Both are legitimate; name which one you’re getting. Kohler and Toto are two fixture lines we specify by model number so the bid is exact.

Exhaust fan. Size the fan to the room by cubic footage. Multiply length by width by ceiling height to get cubic feet, then aim for a fan rated at roughly one CFM per ten square feet of floor in a standard 8-foot room, with a slightly higher rating for a room with a tub. A fan that’s too small leaves moisture on the walls; one that’s oversized just noise. This formula is the single most-skipped part of a bathroom spec, and it’s where mold problems start in Arlington’s humid summers.

The Scope Document You Require Before Signing

Before you sign anything, the scope should read like an instruction manual, not a promise. Three things in particular have to be in writing, in detail.

  • Fixture schedule with model numbers. Every faucet, valve, toilet, and fan gets a brand and model. “Chrome faucet” is not a spec; “Kohler [model]” is. Model numbers are what make the price verifiable.
  • Tile specification with square footage and waste factor. The square footage of the room, the square footage of tile being ordered, and a waste factor of 10 to 15 percent for cuts and breakage. This tells you how much material is being bought and why.
  • Allowance vs. fixed price. This is the distinction that decides who eats a cost overrun. A fixed-price line is what you’ll pay no matter what the material costs. An allowance is a placeholder – if the tile you pick runs over the allowance, you pay the difference. Both are legitimate, but they must be labeled clearly so the final number isn’t a surprise.

When a change is needed mid-job, no work proceeds until the change order is signed. That administrative step is why projects finish within a few percent of the number the customer agreed to. It’s also why we offer a Free Second Opinion on any written estimate you’re holding from another contractor – bring it in and we’ll read it line by line, at no charge.

How Much Does a Bathroom Remodel Cost in Arlington?

Here’s the line-item picture for an Arlington bathroom, priced by scope and component so you can see where the money goes.

  • Cosmetic refresh (fixtures, vanity, paint, tile over): $8,000 to $18,000
  • Partial remodel with updated plumbing rough-in: $18,000 to $38,000
  • Full gut-and-reconfigure: $40,000 to $75,000 and up
  • Tile substrate and waterproofing, labor and materials: $1,200 to $3,500
  • New shower valve and trim (pressure-balance to thermostatic): $400 to $1,800
  • Exhaust fan, correctly sized and vented: $250 to $900
  • Galvanized-to-copper supply swap where exposed: $1,500 to $4,000
  • Cast-iron drain section replacement: $1,000 to $3,500

The swing that catches homeowners off guard is the last two lines. A bathroom that looked like a $12,000 cosmetic job can become a $20,000 partial once the wall opens and the cast iron is gone. That’s why the pre-bid inspection exists – so the number on the page is the number you actually pay. Call us for an exact quote – estimates are free.

Common Mistakes to Avoid

  • Accepting a bid nobody inspected for. If the contractor never opened an access panel or looked at the joists, the price is a guess. The guess gets corrected later, on your dime.
  • Choosing finish material before confirming the rough-in. Falling in love with a curbless shower before checking joist depth can turn a $20,000 job into a $30,000 one. Confirm the structure first, then pick the tile.
  • Skipping the exhaust fan sizing. Arlington’s summer humidity is hard on a bathroom. An undersized fan keeps moisture on the walls and grows problems behind the paint.
  • Not asking who eats the overrun. Allowances without labels are where budgets go wrong. A labeled allowance is fine; an unlabeled one is a trap.
  • Drain relocation without a permit. It’s easy now and painful at resale. If the drain moves, pull the permit.
  • Closing the walls too early. Rough-in inspection has to happen while the plumbing and electrical are visible. Covering early means tearing out later.
  • Comparing bids with different scopes. A $14,000 bid that replaces nothing behind the wall isn’t cheaper than a $22,000 bid that swaps the supply lines – it’s a different job. Compare scope to scope, not total to total.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

When to Call a Professional

Some of this work is genuinely dangerous and shouldn’t be a weekend project. Galvanized and cast-iron work behind a wall, anything touching the electrical panel or GFCI circuit, and any drain relocation all belong to a licensed professional – a mistake in a supply line behind tile means tearing the tile back out to fix it, and a mistake in an electrical panel is a genuine hazard. If you’re opening a wall and you don’t know what you’ll find, that’s exactly the moment to bring someone in who does. Our technicians have up to 19 years of experience reading exactly these conditions. Rowan Construction Group Arlington offers free estimates in Arlington – call (844) 761-7521. Bathrooms tie into the wider work we do across the home; you can see how we approach a full-home scope on our Rowan Construction Group Arlington home page, and if the project grows into an addition or an in-law suite, that’s covered on our Home Additions & ADU in Arlington page.

Frequently Asked Questions

The Bottom Line

A tile setter installing wall tile in a shower

A bathroom in Arlington is priced correctly only when someone has looked behind the wall first. The three tiers – cosmetic, partial, and full gut – sit at roughly $8,000 to $18,000, $18,000 to $38,000, and $40,000 and up, and the difference between them is almost always the plumbing and electrical condition, not the tile. Get the pre-bid inspection, require a scope with model numbers and labeled allowances, confirm the permit sequence, and require a signed change order for any change. Do those four things and the $4,000 to $9,000 surprise never happens. The price you’re quoted is the price you pay, in writing, before anyone picks up a tool.

Call Rowan Construction Group Arlington at (844) 761-7521 to schedule your free estimate. Bring any written estimate you’re holding from another contractor and we’ll review it line by line at no charge – no obligation, no pressure, just a confirmed number you can compare.

Written by the team at Rowan Construction Group Arlington.

Getting started with Rowan in Arlington

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Arlington team

A local vetted partner works across Arlington and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Arlington? Licensed & insured · free written estimates
Call (844) 761-7521
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Rowan Construction Group Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch