







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterBacksplash, Tile & Flooring in Arlington, TX
Backsplash, tile and flooring work in Arlington covers the surfaces you touch and look at every day: the slab or tile underfoot, the backsplash behind the range, the floor that ties a kitchen together. Most homeowners call us when a surface has failed or when a remodel has reached the point where the old material has to come out. We handle the substrate, the membrane, the layout and the finished surface as one job, so the tile doesn’t telegraph cracks through a floor that wasn’t prepped right underneath. Call (844) 761-7521 and a live person answers, day or night.
This page sits under our larger Kitchen Remodeling work, and most of these jobs start there. A backsplash or floor rarely exists on its own; it’s usually the visible finish on a kitchen that’s being reworked from the studs out.
Key Takeaways
- Arlington’s expansive clay soil moves with the seasons, and that movement is the single biggest cause of cracked tile floors we see in older homes.
- A written flat price lands before any tool comes out – no “call for a quote.”
- We use Schluter uncoupling membranes under tile floors to absorb that seasonal movement and keep the surface intact.
- Every visit ends with a documented photo record of what we found and what we did, included as standard.

When You Need Backsplash, Tile & Flooring
Tile and flooring failures usually announce themselves before they fall apart. Here’s what brings Arlington homeowners to us.
- Hairline cracks tracking across a floor. In Arlington, the clay soil under most of the city swells when it’s wet and shrinks when it dries out. A tile floor laid directly on a slab without an uncoupling layer will crack along those seasonal movement lines within a few years. We see this constantly in homes built in the 1990s and 2000s.
- Grout that’s crumbling or discolored. Old grout fails from moisture and traffic. When it starts coming out in the joints, water is getting behind the tile, and the fix isn’t a grout refresh – it’s usually removing and resetting.
- A backsplash that dates the whole kitchen. A 4-inch builder-grade splash or a busy 2005-era glass mosaic will pull down an otherwise current kitchen. Swapping it is one of the highest-return cosmetic changes you can make, and we plan it around the cabinets and countertops you’re keeping.
- Lippage you can feel with your hand. Tile edges that don’t sit flush catch on bare feet and mop heads. That’s a layout or substrate problem, not a finish problem – and it doesn’t fix itself.
- Sound or flex underfoot. A hollow thud when you walk across the floor means the tile has debonded from the substrate. Left alone, it cracks.
- A remodel that’s ready for finishes. If cabinets and countertops are set and the floor is still bare concrete, the sequencing matters. We coordinate the floor and splash so the finished surfaces line up cleanly.
Our Backsplash, Tile & Flooring Process
We treat the substrate – the layer the tile actually bonds to – as the real job and the tile as the reward. Here’s how a project runs, from first call to final photo record.
- Assessment and written scope. We look at the existing floor and walls, describe the condition in plain terms (slab or wood subfloor, existing membrane or none, grout condition, deflection), and hand you a flat written price with a written scope and warranty before any work starts. That’s Clause 1 of The Haven Standard, and it applies to every trade we run, from kitchen tile to whole-home renovation.
- Demo and substrate prep. We pull the old tile and underlayment, check the subfloor or slab for movement and moisture, and correct what we find. Any change beyond the written scope pauses until you sign a change order – the discipline that keeps our projects within a few percent of the agreed price.
- Membrane and layout. For floors, we set an uncoupling membrane like Schluter’s Ditra system, which isolates the tile from slab and subfloor movement. For backsplashes, we plan the layout around the range, outlets and cabinet lines, and we set the pattern and grout width on paper before cutting anything.
- Setting and grouting. We set the tile, keep the joints even, and grout with a product matched to the traffic. For kitchen floors we’ll spec a porcelain that holds up to dropped pans and wet mopping.
- Final walk and photo record. We walk the finished surface with you, note anything that needs a touch, and hand over the documented photo record of what we found and what we did. If something isn’t right within 365 days, the Done Right Promise says we make it right – printed on the page, backed by a terms page, not an asterisk.

Backsplash, Tile & Flooring Pricing in Arlington
Here are honest starting ranges for our backsplash, tile and flooring work in Arlington. These are the numbers we put in writing so you can screenshot them and compare against any other quote. A flat written price follows a walkthrough; the range below tells you where the written number will land.
| Project | Typical range | What moves the number |
|---|---|---|
| Kitchen backsplash (standard field tile) | $600 – $1,600 | Square footage, tile choice, outlet cut-outs, whether old splash comes off cleanly |
| Backsplash with full-height range wall or large-format tile | $1,400 – $3,000 | Large-format cuts, accent bands, stone vs. porcelain |
| Tile floor, kitchen, removed and reset on membrane | $1,800 – $4,500 | Old tile removal, substrate repair, membrane, tile size |
| Floor prep and slab crack correction | $300 – $900 | Whether the slab needs crack isolation, self-leveling, or just a clean |
| Grout and caulk refresh (existing tile) | $250 – $650 | Joint count, whether there’s water damage to address first |
| Tile shower surround (as part of a kitchen-adjacent bath) | $2,000 – $5,500 | Waterproofing, pan, tile format |
The biggest cost driver is never the tile itself – it’s what’s under it. Arlington’s clay soil means a floor that looks fine can need slab corrections before tile goes down, and a good quote accounts for that rather than discovering it mid-job. The second driver is tile size: a large-format porcelain needs flatter surfaces and more careful setting, and it’s worth paying for the right installer. For fixtures and material choices that pair with tile work, we source through our combined trades – think Grohe and Toto for the kitchen and bath fixtures that sit around the surfaces, pulled from the same fifty-plus vetted brand list that keeps our quotes honest.
Every written estimate comes with a free second opinion on any written estimate you bring us – a competitor’s quote reviewed line by line, at no charge. And pricing is no-hassle upfront: written before any work starts, every time.
FAQs – Backsplash, Tile & Flooring
How much does a kitchen backsplash cost in Arlington, TX?
A standard kitchen backsplash in Arlington typically runs $600 to $1,600 installed, while full-height or large-format work lands between $1,400 and $3,000. The difference comes down to square footage, tile choice, and how the old splash comes off. Call (844) 761-7521 for an exact flat written price after a walkthrough – estimates are free.
Can you fix a cracked tile floor in Arlington?
Usually, yes, but the fix depends on why it cracked. In Arlington, most cracks we see trace to clay-soil movement under the slab, so resetting tile on an uncoupling membrane is the durable answer. If the substrate is sound and only one or two tiles are cracked, a spot repair is often enough. Call us for a walkthrough – we’ll tell you which one you’re looking at before you commit to anything.
Is it cheaper to repair or replace a kitchen floor?
Repair is cheaper when the substrate is sound and the damage is isolated; replacement is usually the better call once moisture has reached the grout or underlying subfloor. A single-tile repair might run a few hundred dollars, while a full removal and reset runs $1,800 to $4,500. We’ll give you the honest comparison in writing, not the more expensive option by default.
Do you install Schluter membrane under tile floors?
Yes, we set Schluter’s uncoupling membrane under tile floors as standard on remodel work, and it’s one of the reasons our floors hold up through Arlington’s wet-dry swings. The membrane isolates the tile from the slab so seasonal movement doesn’t transfer through. Call (844) 761-7521 and we’ll walk you through what your floor needs.
How long does a backsplash and floor job take?
A kitchen backsplash usually takes one to two days; a full floor removal and reset runs four to seven days depending on substrate prep and cure time. We give you the timeline in the written scope so you can plan the kitchen outage. Call for an estimate and a realistic schedule.
Get Your Written Price Before Anyone Picks Up a Tool
We put the number in writing before anyone starts, and we back it with The Haven Standard, the 365-Day Done Right Promise, background-checked and uniformed technicians, and a documented photo record on every visit. If you’re comparing quotes, bring us yours – the second opinion is free. Call (844) 761-7521 for a free estimate on your backsplash, tile or flooring project in Arlington, or reach out to schedule a walkthrough. A live person answers calls 24/7.
Written by the team at Rowan Construction Group Arlington, serving Arlington.


