







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Arlington Homeowners Choose PGT Construction
We provide independent PGT construction service in Arlington, TX – diagnosis, glass replacement, hardware repair, and full unit installation for PGT WinGuard impact windows, Aluminum Series sliders, and Vinyl Series windows. What makes our PGT work different is that we’re not tied to a manufacturer’s sales program, so our recommendation comes from the condition of your unit, not a quota. We’re Rowan Construction Group Arlington, working across seven residential trades under The Haven Standard.
To be clear and honest up front: we are not affiliated with, authorized by, or endorsed by PGT. We’re an independent PGT service provider that works on these units regularly. We cover Arlington neighborhoods including north Arlington, the far east side, and the 76013 and 76014 ZIP codes where older ranch homes mix with newer builds. Call (844) 761-7521 for a written price before any work starts.
Why Trust Rowan Construction Group Arlington for Your PGT Construction?

PGT builds windows in distinct families, and each family fails in its own way. WinGuard impact units use laminated glass assemblies. The Aluminum Series sliders use aluminum frames with a specific sill pan and weep path. Vinyl Series single-hungs and casements rely on welded corner joints and compression weatherstripping. Our technicians have up to 19 years of experience working with these units, and they know that a fogged WinGuard IGU and a dragging slider are two completely different problems with two completely different fixes.
We match replacement parts to the actual model and vintage of your unit – sealed glass units, rollers, and hardware sized for the track and frame you have, not a generic substitute. That matters because mismatched rollers create drag, and a wrong-sized IGU won’t seat cleanly in the sash.
Warranty-safe practice is part of the job. We document the unit’s condition before we touch it, keep the OEM parts trail in your written record, and photograph what we found and what we did. Every visit includes that documented photo record as a standard deliverable. If your PGT unit is still inside its manufacturer’s coverage, we’ll tell you plainly so you can pursue the claim – no work order needed to get that answer.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Arlington
Arlington sits in the DFW Metroplex, where hail and wind-driven rain are the two forces that test PGT units most. Here are the failures we see most often, and why they happen.
- Seal failure in WinGuard laminated impact glass. You notice a hazy or milky band creeping in from the edge of the pane, or fogging between the glass lites that no amount of cleaning touches. The laminated IGU’s perimeter seal has broken down, letting moisture into the assembly. This is not cosmetic: once the seal is compromised, the impact performance of that lite is in question. A sealed unit replacement addresses it directly.
- Roller and track wear on PGT Aluminum Series sliding glass doors. The door drags, jumps the track, or won’t latch square. Rollers wear flat or seize after years of use, and a dropped or debris-packed track compounds it. The latch misalignment is a symptom, not the root cause.
- Water intrusion at the sill pan on aluminum sliders. Staining on the drywall below the door, or swelling in the trim under the unit, is the tell. The sill pan or weep system isn’t draining, often after a hail event or years of debris buildup. This is the failure that does hidden damage to the wall assembly if left alone.
- Failed weatherstripping and corner welds on vinyl frames. Air and moisture find their way in around the sash perimeter. On PGT Vinyl Series single-hungs and casements, this often shows as a draft, a whistle in wind, or water staining at the corner joint.
- Hail damage to frames and sills. Dents, cracks, or compromised seals on the frame or sill after a storm. Whether it means replacement depends on where the damage sits: a cosmetic dent in a sound frame is a different bill than a cracked sill on a slider. Knowing which you have is the whole game.
PGT Parts & Our Repair-vs-Replace Approach

Parts get matched to your unit’s model and vintage before anyone orders. We don’t claim to stock PGT parts locally – we source the right sealed glass unit, roller set, or hardware group for the specific series and year, and we don’t substitute used or mismatched components. A wrong roller set on an Aluminum Series slider will just drag and re-leak.
Repair versus replace comes down to the frame. If the frame is sound and the IGU has failed, re-glassing the sash is usually the honest answer, and it costs less. If the frame itself is cracked, bowed, or the sill pan is rotted out, replacement is the better spend. We’ll show you the condition of both and quote the flat written price for each path before any work starts. Under Clause 1 of the Haven Standard, the price is written before anyone picks up a tool. Call (844) 761-7521 for a free estimate.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We identify the exact PGT model and series, then confirm the cause: broken IGU seal versus roller wear versus sill pan backup. We photograph the condition and describe it in plain terms in the written record.
- 2
Written price and scope. You get a flat price and written scope before work starts. No work proceeds on a change until the change order is signed.
- 3
Repair or installation. Re-glassing the sash in place, resetting and re-flashing a door opening, replacing hardware, or installing a new unit – depending on what the diagnosis supports and what you approve.
- 4
Test and verify. We check the weep path drains, the latch aligns, the sash seals, and the rollers ride clean before we call it done.
- 5
Documentation and warranty. You receive the photo record, the signed paperwork, and the written warranty. Every job is covered by the 365-Day Done Right Promise: if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Arlington
We work on the PGT lines Arlington owners actually have. WinGuard impact-resistant vinyl windows and doors cover most of the residential impact work we see. The Aluminum Series sliding glass doors are common on patios and rear walls of the older brick ranches. Vinyl Series single-hungs and casements make up a lot of replacement and repair volume, and Premier Series impact windows round out the impact-rated stock. We service and install across these families. We don’t claim to stock any of them. If you’re unsure which series you have, the identity plate on the sash usually tells you.
We Also Service These Brands
PGT is one focus, not the whole business. Rowan Construction Group Arlington also services and installs KraftMaid cabinetry, Kohler fixtures, GAF roofing, and Master Halco fencing. That range matters when a PGT window job touches the wall assembly, the trim, or a roofline that also needs attention – you’re working with one contractor across the trades instead of coordinating several.
FAQs – PGT Construction Service in Arlington

No. We’re an independent PGT service provider and are not affiliated with, authorized by, or endorsed by PGT. We work on PGT units and match parts to your specific model and vintage, but any manufacturer warranty claim on the product itself runs through PGT.
We source OEM-compatible parts matched to your unit’s series and vintage, and we keep the parts trail in your written record. That means the right sealed glass unit, roller set, or hardware group for the unit you have – not a used or generic substitute. Call (844) 761-7521 for a free estimate.
Yes, in most cases. If the frame is sound but the laminated IGU’s seal has failed, re-glassing the sash is usually the honest answer and costs less than a full unit swap. Fogging or a milky band creeping from the edge is the usual sign the sealed unit has gone. Full replacement becomes the better call when the frame is cracked, bowed, or the sill pan is rotted. Call (844) 761-7521 for an exact quote – estimates are free.
Worn rollers and a dropped or debris-packed track are the usual cause; the latch misalignment is a symptom, not the root problem. A roller and track service resets the door square and lets it latch cleanly again. If the frame or sill is also compromised, replacement may be the better spend. Call (844) 761-7521 to schedule a free estimate.
It depends on the replacement sealed unit and the documentation, which is exactly why we match the IGU to your unit’s series and keep the parts trail. A correctly matched impact-rated glass unit preserves the assembly’s intended performance; an unmatched substitute may not. Call (844) 761-7521 to talk through your specific unit – estimates are free.
Water staining on the interior drywall or swollen trim below the door usually means the sill pan or weep system isn’t draining – often after hail or years of debris buildup. Left alone, it damages the wall assembly, so it’s worth diagnosing early rather than patching the drywall and moving on. Call (844) 761-7521 for an exact quote – estimates are free.
Not always. A cosmetic dent in a sound frame is a different bill than a cracked sill or a compromised seal on a slider. The honest answer comes from checking whether the frame is structurally intact and whether the seal still holds. Call (844) 761-7521 to schedule a free estimate.
Here are the market ranges we work to in Arlington. Your flat written price comes before any work starts, and no change proceeds without a signed change order.
| Service | Typical Price Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Replacement & Installation | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
Call (844) 761-7521 for an exact quote – estimates are free.
Book Your PGT Service in Arlington, TX
Whether it’s a fogged WinGuard pane, a dragging slider, or an impact window you’re ready to install, we’ll put the number in writing before anyone starts. Call Rowan Construction Group Arlington at (844) 761-7521 for a free estimate, and bring a competitor’s quote if you have one – we’ll review it line by line at no charge. Calls are answered by a live person 24/7.
Written by the team at Rowan Construction Group Arlington.












