







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Arlington Homeowners Choose Owens Corning Construction
Rowan Construction Group Arlington provides independent Owens Corning construction service across Arlington – roof replacement, roof repair, emergency and storm damage work using OC Oakridge and Duration shingle systems matched to what’s already on your roof. What sets our Owens Corning work apart is that every job is checked against OC’s published installation instructions and Arlington code before anyone leaves, with a written flat price delivered before work begins. We’re an independent service provider, not affiliated with or authorized by Owens Corning, and we tell you that up front. Call (844) 761-7521 for a free estimate.
Why Trust Rowan Construction Group Arlington for Your Owens Corning Construction?

Our technicians have up to 19 years of experience, and that time shows in how they handle OC-specific details the generic crews miss. They know where the nail line sits on a Duration shingle and that a high-nailed or overdriven fastener is what causes tab lift in the next wind event – not the shingle itself. They read the published installation instructions for each OC system, from Oakridge architectural shingles to FOAMULAR rigid board behind siding, and they match the fastening, underlayment and flashing spec to the existing roof rather than guessing.
Warranty-safe practice is a habit here, not a talking point. We use genuine Owens Corning shingles, underlayment and accessories matched to your existing OC system, and where a quality aftermarket ventilation or flashing product does the job better than the OEM option, we say so and explain why. If a claim could hinge on installation error, our documented photo record protects you – it shows the fastening pattern, the deck condition and the underlayment before the shingles went down. That record comes with every visit as standard.
Under Clause 1 of The Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order. On Owens Corning work in Arlington, that means you know the number on the roof system before a single bundle comes off the truck.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Owens Corning Construction Problems We Fix in Arlington
These are the OC-specific issues we run into most in Arlington, and what actually causes them:
- Hail and wind damage on Duration and Oakridge shingles. Storm hits cause granule loss, bruised mats and cracked or lifted tabs. These show up as leaks in the attic long before the damage is visible from the ground, which is why a roof that looks fine from the driveway after a hail event still needs a proper inspection.
- High-nailed or overdriven OC shingles. When nails land above the nail line or get driven through the shingle, tabs lift and blow off in high-wind events. The shingle gets blamed; the fastening is usually the real story, and it’s one of the most common installation defects we correct.
- Inadequate attic ventilation aging the shingles early. Missing or undersized intake and exhaust ventilation causes premature aging, curling and blistering of OC shingles. In Arlington’s extreme summer heat, that clock runs faster, and the early failure gets pinned on the product when the ventilation is what’s short.
- Flashing and underlayment failures around chimneys, valleys and penetrations. Poorly installed flashing and underlayment lets water get under the OC shingles and rot the roof deck – the shingle itself is not the real problem here. We often find the leak source at a valley or chimney where the shingle looked intact.
- Cracked or lifted tabs after a North Texas freeze-thaw swing. Arlington’s clay soils and wet-dry cycles work the whole house, and roof movement can lift tab seals on older Oakridge roofs. Brittle, sealed-shut shingles across a whole roof point toward replacement rather than patching.
Owens Corning Parts & Our Repair-vs-Replace Approach

For Owens Corning repairs we use genuine OC shingles, underlayment and accessories matched to the existing system so the repair blends and the warranty stays intact, and we turn to quality aftermarket ventilation and flashing products where they outperform the OEM option. We source parts specific to each job; we don’t claim to keep OC stock on hand. On a partial repair, matching the shingle color and profile to your existing Oakridge or Duration roof matters as much as the install, and we tell you honestly when a dye-lot difference will show.
The repair-versus-replace call comes down to scope. When storm damage is limited to a few slopes, we repair those slopes and keep the rest of the roof. When the OC shingles are brittle across the whole roof, patching is throwing money at a failing system, and we’ll say that plainly. Bring us any written estimate and we’ll review it line by line at no charge. Call (844) 761-7521 to set an inspection.
See the difference
Before
After
Before
After
Before
AfterOur Owens Corning Service Process – Step by Step
- 1
Diagnosis. We inspect the roof, attic and ventilation, map the damaged slopes, and check fastening and flashing. We describe what we found in plain terms – the condition of the deck, the shingle layer count, the state of the flashing – and leave you a documented photo record.
- 2
Written price and scope. Before any work starts, you get a flat written price with a written scope and a written warranty, so you can compare it against any other Owens Corning estimate.
- 3
Repair or install. We replace the affected OC shingles or the full roof system with matched OC shingles, underlayment and flashing, working to the published OC installation instructions and Arlington code, with any change under a signed change order first.
- 4
Test and record. We check the finished work for fastening, sealing and drainage, and hand over the photo record covering what was found and what was done.
- 5
Warranty. The 365-Day Done Right Promise backs the work: if it’s not done right, we make it right. Calls are answered by a live person 24/7.
Owens Corning Products We Service & Install in Arlington
The Owens Corning systems we handle most in Arlington are Duration Premium Shingles, including the Duration Storm series for hail-prone roofs, and Oakridge Architectural Shingles for homeowners who want the architectural look at a lower material cost. We also work with Supreme and Traditional 3-tab shingles on older Arlington homes, and with FOAMULAR rigid foam insulation board used behind siding and under slabs. If your roof already carries an OC system, we match the repair to it rather than selling you a different brand.
We Also Service These Brands
Rowan Construction Group Arlington isn’t tied to any one manufacturer. Alongside Owens Corning, we work with KraftMaid cabinets, Kohler fixtures, GAF roofing and PGT windows and doors across our seven trades. That breadth means we can give you an honest read on which brand fits the job, not just which one we’d rather sell you.
FAQs – Owens Corning Construction Service in Arlington

No. We’re an independent Owens Corning service provider, not affiliated with, authorized by, or sponsored by Owens Corning. Our credibility comes from handling the specific OC systems North Texas homes actually have and checking each job against OC’s published installation instructions and local code. Call (844) 761-7521 with questions about your roof.
Yes. We use genuine Owens Corning shingles, underlayment and accessories matched to your existing OC system so the repair blends and warranty coverage stays intact, and we turn to quality aftermarket ventilation and flashing products where they outperform the OEM option. We source to each job rather than claiming stocked parts.
It depends on scope. A targeted repair on a few slopes is usually a shorter job than a full roof replacement, and after a hail or wind event we map the damaged slopes first so the timeline is based on what’s actually there. Severe roof damage from storms can qualify as emergency work. Call (844) 761-7521 for a written scope and timeline.
We cover Duration Premium Shingles including the Duration Storm series, Oakridge Architectural Shingles, Supreme and Traditional 3-tab shingles, and FOAMULAR rigid foam insulation board. If your Arlington roof already carries an OC product, tell us the series and we’ll match the repair to it.
Not if it’s done to OC’s installation requirements. We work to the published OC instructions and keep a documented photo record of fastening, deck condition and underlayment, so the installation record protects your coverage. Call (844) 761-7521 and we’ll walk through what your warranty requires before work starts.
Here are the market ranges for the Owens Corning work we do in Arlington, stated in dollars so you can compare:
| Service | Typical Arlington Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Metal Roof Installation | $15,000 – $40,000 |
These are ranges, not quotes; your exact price comes after inspection. Call (844) 761-7521 – estimates are free and the price is written before any work starts.
Written by the team at Rowan Construction Group.












