







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Arlington Homeowners Choose GAF Construction
We provide independent GAF roofing service in Arlington, TX – repair, replacement and storm damage work on Timberline HDZ, Timberline UHDZ, Grand Sequoia and EverGuard TPO systems. What sets the work apart is the diagnosis: we match the failure to the model and its installation details, and put a flat written price in front of you before anyone touches the roof. Rowan Construction Group Arlington is not GAF-authorized or sponsored; we’re an independent service provider connecting homeowners with local roofing professionals who install to GAF’s published standards.
Arlington’s hail seasons and hard summer heat punish shingles in ways a generic inspection misses. Call (844) 761-7521 to schedule a free estimate.
Why Trust Rowan Construction Group Arlington for Your GAF Construction?

Our technicians have up to 19 years of experience, and on GAF roofs that experience shows up in small places. They know that a Timberline HDZ shingle nailed a half-inch outside GAF’s nailing pattern loses wind-uplift resistance at the rake edge long before the field of the roof fails. They know which GAF underlayment belongs under which system, and why a leak at a pipe boot on a Grand Sequoia roof usually traces back to a skipped flashing detail rather than a bad shingle.
Warranty-safe practice is the other half. GAF’s published installation standards control coverage, and work that departs from those details, from starter strips nailed outside the pattern to ventilation gaps, can compromise a claim. We source GAF-branded accessory components when they affect warranty-eligible system performance, keep the install inside the manufacturer’s published details, and document what we found before any repair begins.
Every Arlington job is quoted with a flat written price and a written scope before work starts. No change proceeds without a signed change order. Under Clause 1 of the Haven Standard, the number is written down first.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common GAF Construction Problems We Fix in Arlington
These are the GAF issues we see most often on Arlington roofs, and each one has a real cause worth naming before you hire anyone.
- Hail bruising and granule loss on Timberline HDZ. After a hail event, the shingle mat takes impact damage the eye reads as simple wear. The tell is granules collecting in gutters and soft spots you can feel with a hand. Left alone, the compromised mat becomes a leak source at the next hard rain, and the fix is a documented, slope-by-slope inspection.
- Wind uplift at rake and eave edges. This happens when StarterMatch or Pro-Start starter strips are omitted, or nailed outside the GAF nailing pattern. The edge lifts first in a North Texas gust front, and once it lifts, the field shingles unzip.
- Premature sealant failure and shingle cracking. Steep-slope Arlington roofs with inadequate attic ventilation run hotter than GAF’s recommended deck-temperature limits. The sealant strips cook, shingles crack, and the shingles stop sealing down in the wind.
- Leaks at pipe boots and step flashing. Grand Sequoia and Designer roofs that skipped GAF-approved flashing details tend to leak at penetrations and wall intersections long before the shingle field shows any problem.
- EverGuard TPO seam and fastener issues. On low-slope additions, seams and fastener plates that see ponding or heat cycling need correct welding and attachment details, or the membrane pulls loose at the perimeter.
GAF Parts & Our Repair-vs-Replace Approach

GAF doesn’t sell its shingles as parts, but the accessory system – starter strips, ridge cap shingles, underlayment – is where we make the call on OEM versus aftermarket. We use GAF-branded accessory components wherever they affect warranty-eligible system performance, and quality aftermarket drip edge or pipe boots where the aftermarket part meets code and performs. We don’t stock parts locally on any truck; each job’s material list is quoted and sourced per project.
Deciding repair versus replace is where we stay honest. Repair is usually the right call for isolated storm damage on a roof under 15 years old, especially when the damage is confined to one or two slopes. Full replacement makes sense once granule loss or deck deflection spans multiple slopes, and a patch would simply carry the same problem around the roof. Call (844) 761-7521 for a free second opinion on any written roof estimate. We’ll review it line by line.
Our GAF Service Process – Step by Step
- 1
Diagnosis. We inspect the roof slope by slope, count the shingle layer, check the deck and attic ventilation, and photograph the penetrations and edges. A Timberline HDZ bruise and a worn shingle field get different recommendations.
- 2
Written quote and scope. A flat written price and a written scope before any work starts. That includes the material call – GAF accessories versus aftermarket – and the ventilation assumptions.
- 3
Repair or install. If repair is the call, replacement shingles are matched to the existing GAF line and starter strips and ridge caps are reinstalled to GAF’s published details. If replacement, the install follows GAF’s nailing pattern and underlayment specs.
- 4
Test and documentation. We check the roof at every penetration and edge, verify the membrane or shingle seal, and hand over a documented photo record of what was found and what was done.
- 5
Warranty and the 365-Day Done Right Promise. The written warranty is part of the quote. If it isn’t done right within the first 365 days, we make it right.
See the difference
Before
After
Before
After
Before
AfterGAF Products We Service & Install in Arlington

We work with the GAF shingle lines and systems Arlington homeowners most often have on their roofs:
- Timberline HDZ – the dominant residential shingle in Arlington’s tract housing and mid-century ranches.
- Timberline UHDZ – the heavier architectural line, seen on English-accented front elevations and steeper fancies.
- Grand Sequoia – the designer shingle line for luxury and architecturally distinctive homes.
- EverGuard TPO – low-slope membrane work on additions, garage tie-ins and flat-roof sections.
We quote and source materials per project, never from stock, and always to the system the roof was built with.
We Also Service These Brands
GAF is one line, not the whole job. Rowan Construction Group of Arlington also works with KabinetCraft and Wellborn cabinets, Kohler and Toto fixtures, PGT windows and Master Halco fencing, so the written quote reflects a real material comparison rather than a single-brand default. When a roof replacement expands into a home addition or a garage conversion, the brand plumbing stays consistent and the pricing stays documented.
FAQs – GAF Construction Service in Arlington
GAF’s coverage depends on installation to its published standards, and its stronger warranty tiers typically require installers in its certification programs. We are an independent GAF service provider, not certified or sponsored by GAF, so we install to GAF’s details but do not claim GAF certification. Call (844) 761-7521 for a free estimate and a copy of the written warranty scope.
Hail damage on Timberline HDZ shows as bruises and soft spots on the shingle mat, with granules collecting in gutters after a storm – normal wear is even granule loss across the field with no soft spots. The two look similar from the ground and different at arm’s length. Call (844) 761-7521 for an inspection with photos, free estimate.
Repair is usually right for isolated storm damage on a roof under 15 years old; replacement makes sense once granule loss or deck deflection spans multiple slopes. We recommend on that basis, not on the size of the invoice. Call (844) 761-7521 for a free second opinion if you already have a written estimate.
GAF’s published system guidance allows its branded underlayments under Timberline, and the right choice depends on roof pitch and code. In Arlington, the sensible call is the underlayment GAF lists for the system, verified on the spec sheet, not whatever is on the truck. Call (844) 761-7521 and we’ll put the underlayment and its spec in writing.
Yes, an independent roofer can install Grand Sequoia on a steep-slope Arlington roof, provided the install follows GAF’s published flashing and ventilation details for the designer line. The steep-pitch work is where the flashing details matter most. Call (844) 761-7521 for a free estimate.
GAF roof replacement in Arlington runs $8,000 – $20,000, roof repair runs $400 – $1,800, and a metal roof installation runs $15,000 – $40,000. The final figure depends on roof size, pitch, deck condition and whether ventilation work is needed. Call (844) 761-7521 for a flat written quote before any work starts – estimates are free.
| GAF Service | Typical Arlington Cost |
|---|---|
| Roof Replacement (GAF shingle system) | $8,000 – $20,000 |
| Roof Repair (isolated damage) | $400 – $1,800 |
| Metal Roof Installation | $15,000 – $40,000 |
Written by the team at Rowan Construction Group Arlington.
Book Your GAF Service in Arlington, TX
If you have a GAF roof and you want a straight diagnosis and a flat written price, call Rowan Construction Group Arlington at (844) 761-7521 to schedule your free estimate. We’ll document what we find, quote the work line by line, and match the repair to the shingle system you already own.
Written by the team at Rowan Construction Group Arlington.












