







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Arlington Homeowners Choose Belgard Construction
Belgard construction service in Arlington means installing and repairing Belgard pavers and wall systems to the manufacturer’s spec: a compacted crushed-stone base, correct fall away from the house, and polymeric joint sand. Rowan Construction Group Arlington handles Belgard Dublin Cobble, Catalina, Weston Stone, and Mega-Lafitt systems on paver driveways, patios, and retaining walls across the city. We’re an independent installer, not affiliated with, sponsored by, or endorsed by Belgard. What separates our Belgard work is base discipline in North Texas clay, not the color anyone picks.
Why Trust Rowan Construction Group Arlington for Your Belgard Construction?

Belgard products fail for reasons that show up before a single paver is laid: subgrade, base depth, and where the water goes. Our technicians have up to 19 years of experience, and that time gets spent on excavation and compaction, not on stacking units. Dublin Cobble has a dimensional tolerance that punishes a soft base. Catalina and Weston Stone caps read clean only when the block behind them is course-level and pinned. We work to Belgard’s published installation guidance on edge restraint and geogrid so the wall or field behaves the way it should.
We’re careful about warranty. Most Belgard product warranties cover manufacturing defects and don’t cover installation error, so a warranty-safe job means meeting base compaction, jointing, and drainage requirements in writing before the crew starts. We match genuine Belgard blocks and caps when a field is extended, because color and dimensional lots drift between production runs. You get a written price before any work starts, a documented photo record of the base before it’s covered, and the 365-Day Done Right Promise behind it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Arlington
These are the Belgard failures we see most on Arlington properties, and what actually causes them.
- Efflorescence and salt bloom on Dublin Cobble and Catalina. A white haze across the surface usually means water is trapped behind the wall or under the paver base and is migrating through the concrete. It isn’t dirt and it isn’t a bad lot. If the drainage path never got established, the bloom comes back after every wet season until the water has somewhere to go.
- Polymeric joint sand washing out after one season. On driveways and patios, joint sand that blows out almost always comes from a joint that was over-wet during installation or a base that never compacted enough to lock the units. Loose pavers let the sand migrate, and once it’s gone the field starts rocking.
- Catalina and Weston Stone wall blocks rocking or separating. A wall over roughly three feet needs geogrid and a proper base course. Shallow courses and missing grid let individual blocks shift, caps come loose, and the face start to bulge. This is an installation problem, not a block problem.
- Paver heaving and rutting over expansive clay. Arlington’s clay shrinks and swells with wet and dry spells. When the base wasn’t excavated deep enough, the subgrade movement telegraphs up through the pavers as heaving, rutting, and a field that never sits flat. This is the single most common cause of a failing Belgard driveway here.
- Edge restraint failure on driveways and patio borders. Without a properly pinned edge, the outside course creeps outward under load. Once the border moves, the joints behind it widen and the whole field starts to loosen.
Belgard Parts & Our Repair-vs-Replace Approach

We buy genuine Belgard blocks and caps when a wall or field needs extension or repair, because color and dimensional lots have to align or the patch shows. For jointing and base work, we specify proprietary polymeric sand and compactable crushed stone; cheap substitutes are the reason joints fail in a season. We don’t claim to stock Belgard parts locally, so we source per job and tell you the lead time in the written quote.
Repair is usually right when the base and drainage can be corrected. If the failure runs under the whole field, a partial tear-out and rebuild beats patching the top. We’ll tell you which one the evidence supports and put it in writing. Call (844) 761-7521 for a free estimate.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We pull a section to inspect base depth and compaction, check slope and drainage away from the slab or foundation, and photograph what we find before anything is disturbed.
- 2
Written scope and price. Under Clause 1 of the Haven Standard, the price is written before anyone picks up a tool: quantities, genuine Belgard units, base materials, and the warranty, all spelled out.
- 3
Repair or install. Excavate to depth over the clay, lay and compact the crushed-stone base, set edge restraint and geogrid where required, then lay the Belgard units, reset or replace broken ones, re-compact, and re-joint with polymeric sand.
- 4
Test and document. We check fall, joint fill, and drainage, then hand you the photo record of the open base and completed field.
- 5
Warranty. Your written warranty covers the work, backed by the 365-Day Done Right Promise. Any change along the way needs a signed change order first.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Arlington
We work with the Belgard families that show up most on Arlington homes: Dublin Cobble pavers for driveways and patios, Catalina granite wall block for garden walls and seating, Weston Stone for low retaining and border walls, and Mega-Lafitt for taller retaining structures that need geogrid and engineered coursing. We handle new installation, repair, re-jointing, efflorescence correction, and partial rebuilds across these lines. If you have a Belgard unit we haven’t named, send a photo and we’ll confirm coverage.
We Also Service These Brands
Belgard is one part of what we install and repair. Rowan Construction Group Arlington also services KraftMaid cabinetry, Kohler fixtures, GAF roofing, and PGT windows, so a project that touches more than the hardscape stays with one written scope and one point of contact.
FAQs – Belgard Construction Service in Arlington

Is Rowan Construction Group Arlington authorized by Belgard? No. We’re an independent installer, not affiliated with, sponsored by, or endorsed by Belgard. We work to Belgard’s published installation specs and match genuine units, but we don’t act as an authorized dealer.
Do you use genuine Belgard/OEM parts? Yes, when a field or wall is extended or repaired we match genuine Belgard blocks and caps so color and dimensional lots align. For base and jointing we specify quality polymeric sand and compactable crushed stone rather than cheap substitutes.
How long does Belgard service take? A re-joint and efflorescence correction can finish in a day or two. A partial tear-out and base rebuild over North Texas clay typically runs several days depending on square footage and drainage work. Your written quote states the schedule before we start. Call (844) 761-7521 for an exact timeline.
What Belgard models/series do you cover? Dublin Cobble pavers, Catalina granite wall block, Weston Stone wall block, and Mega-Lafitt retaining wall block, plus repair and re-jointing on other Belgard units after a photo review.
Will service void my Belgard warranty? Belgard’s product warranty covers manufacturing defects and generally doesn’t cover installation error, so meeting base, jointing, and drainage requirements protects it. We document the base before it’s covered so there’s a record if a claim ever comes up.
How much does Belgard construction cost in Arlington? Paver patios run $3,500 – $11,000, paver driveways $7,000 – $18,000, a full driveway replacement $5,000 – $14,000, and re-sealing $250 – $700. Base depth, drainage, and whether the failure runs under the whole field move the number. Call (844) 761-7521 for an exact quote; estimates are free.
Book Your Belgard Service in Arlington, TX
Whether your Dublin Cobble driveway is heaving, your Catalina wall has bloomed white, or your polymeric joints are washing out, we’ll write the price before any work starts. Call Rowan Construction Group Arlington at (844) 761-7521 for a free estimate and ask about a free second opinion on any written quote.
Written by the team at Rowan Construction Group.












