A Rowan company - serving Arlington, TX
A new herringbone paver driveway
Belgard · Arlington

Belgard Driveway & Pavers in Arlington, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Arlington
A new concrete driveway with a paver border
A new paver patio with a seat wall and fire pit
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
New architectural shingles with a clean valley
A new casement window over a kitchen sink
A new white vinyl privacy fence with a double gate
New painted shaker cabinets with an organized deep drawer
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Belgard Driveway & Pavers in Arlington: What to Know First

A Belgard paver driveway in Arlington typically costs $7,000 – $18,000 installed, and most projects run three to five working days from excavation to joint sand. We’re an independent Belgard service provider, which means the number we write down is the number you’ll pay – a flat written price with a written scope and written warranty before anyone lifts a paver. This page is for homeowners in Arlington who already know they want Belgard and want the honest local picture on cost, failure modes, and repair-versus-replace.

Call (844) 761-7521

Call (844) 761-7521 and a live person answers, any hour.

How Belgard Products Fail – and How We Fix Them

A crew setting pavers over a compacted base

Belgard makes good hardscape. What fails in Arlington is rarely the pavers and almost always what happens underneath them or at the edges. Here are the five patterns our crews see most on Belgard driveways in this market.

  • Sub-base settlement under the paver field. Belgard stones themselves don’t sink – the compacted base layer does. In Arlington’s black-clay soil, moisture swings push and pull the subgrade until the base loses its lift. We pull the affected field, re-compact the subgrade in lifts, and reinstall on fresh open-graded base. This is a re-base, not a patch.
  • Joint sand loss and weeds in the soldier course. Belgard’s soldier course along a driveway edge is the first place joint sand washes out after heavy rain. Once sand voids, pavers rock and the edge course separates. We reinstall with polymeric joint sand and a properly set edge restraint, then re-sand and compact the field.
  • Drainage and ponding on Belgard paver aprons. A Belgard apron tied to a street that drains toward the driveway will pond unless the slope is corrected at install. Water sitting on Belgard’s textured finish holds a thin film that keeps the joint sand wet. The fix is regrading the sub-base to a minimum 1:50 slope away from the garage, not sealing over the problem.
  • Efflorescence that keeps coming back. A white haze on Belgard pavers usually means moisture migrating through the slab or base and pulling calcium salts to the surface. A one-time cleaner will remove the look; correcting the moisture source is the only durable fix. We diagnose the water path before we recommend any sealer.
  • Edge restraint failure on the driveway crossing. The plastic edge restraint on a Belgard driveway takes load from vehicles where it meets the apron. When it lifts or cracks, the border pavers spread and the whole end of the field moves. We reset the restraint into an anchored concrete edge and re-lay the border.

None of these are Belgard manufacturing defects. They are installation and drainage realities of building in Arlington, and they are why the base work matters more than the box the pavers come in.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Our Belgard Driveway & Pavers Process

  1. 1
    Site walk and base diagnosis. We check the subgrade, the slope, the edge restraint, and the existing pattern. We photograph what we find and send you the images, because a Belgard job is judged by what’s under it.
  2. 2
    Written scope and flat price. You get a written scope, a line-item price, and a written warranty before any work starts – the Haven Standard, Clause 1. If we recommend re-basing instead of re-sanding, the increase is written into the scope, never slipped in later. No change proceeds without a signed change order.
  3. 3
    Material selection. We source genuine Belgard pavers through our network of fifty-plus vetted suppliers and keep the running bond or herringbone pattern matching the existing field so the repair blends.
  4. 4
    The work. We saw-cut the affected field cleanly, excavate to set depth, compact in lifts, set the edge restraint, and reinstall on fresh base. A full driveway install follows one sequence: excavate, grade, compact, lay, sand, compact again, and seal only if you want it.
  5. 5
    Final check and photo record. We check the slope after a test hose run, compact the joint sand, and walk the edge course with you. You leave with a documented photo record of what we found and what we did – standard, not an upgrade.
  6. 6
    Cleanup and warranty handoff. Crews are background-checked and uniformed, and the written warranty goes home with you.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Belgard Driveway & Pavers Costs in Arlington

A remodeled primary bathroom with a soaking tub and walk-in shower

These are the ranges we quote in Arlington. They are the flat price with a written scope, not a starting number.

Job Typical Range
Full Belgard paver driveway install $7,000 – $18,000
Concrete driveway install $4,500 – $12,000
Asphalt driveway paving $3,500 – $9,000
Full driveway replacement $5,000 – $14,000
Belgard paver patio $3,500 – $11,000
Driveway sealing $250 – $700

What moves the price: square footage, access for equipment, how much of the base has to be rebuilt, whether you need a new edge restraint, and the specific Belgard series. A re-base on part of a field costs far less than a full install. Call (844) 761-7521 for a free estimate – we write the number down, and there’s no charge to look.

Why Arlington Homeowners Call Rowan Construction Group Arlington for Belgard Work

Under Clause 1 of the Haven Standard, the price is written before anyone starts, which is why our projects land within a few percent of the agreed number. The 365-Day Done Right Promise covers the work for a full year: if it isn’t done right, we make it right, in writing, with terms on a page – not an asterisk. Our technicians have up to 19 years of experience on hardscape, and crews are background-checked and uniformed. When a Belgard job involves other trades, we carry the same standards into the rest of the house, from KraftMaid cabinetry to GAF roofing, Kohler fixtures, and PGT windows. Bring a competitor’s written quote and we’ll review it line by line, free – the Free Second Opinion. Arlington deserves a contractor who shows the work.

FAQs

A single-story rear room addition with tall windows and a new patio

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
New double-hung windows in a dining roomA new front yard fence with a matching gateAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashing

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Arlington

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Arlington team

A local vetted partner works across Arlington and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 761-7521
Local Service Coverage

Request a Free Estimate in Arlington

Tell us what you need - Rowan Construction Group Arlington responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch