







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling in Arlington: What to Know First
Rowan Construction Group Arlington provides independent KraftMaid kitchen remodeling in Arlington, typically completing full kitchen remodels in three to six weeks from demolition to final punch list. A KraftMaid kitchen remodel in Arlington runs $14,000 to $45,000 depending on cabinet scope, countertop material, and whether the layout changes. As an independent KraftMaid service provider, we’re not affiliated with or authorized by the manufacturer – we’re a licensed, insured remodeling contractor who works on KraftMaid cabinets every week.
This page is written for Arlington homeowners who already have KraftMaid cabinets, or who are planning to install them, and want a contractor who knows the brand’s product lines well enough to plan around their real specifications. Call (844) 761-7521 for a written estimate before anything is ordered.
How KraftMaid Products Fail – and How We Fix Them

KraftMaid builds a solid cabinet, but every line has weak points that show up in Texas kitchens over time. Here’s what we see most often in Arlington homes, and how we handle each one.
- Door and drawer faces on the Vantage and Marquis lines separating at the joints. These are the two KraftMaid series we pull out of Arlington kitchens most often. The mitered or mortise-and-tenon joints on painted maple and oak doors open when summer humidity swings past 60% and then dries out again in October. We remove the face, reglue and clamp the joint, then touch up the finish with a color-matched product – not a generic paint pen that reads a shade off under kitchen lighting.
- Soft-close hinges on KraftMaid’s standard concealed hinges losing tension. Older 110-degree hinges in the Vantage line stop holding the door at rest after a few years of daily use. We swap them for the OEM Blum or Grass hinge KraftMaid specifies for that door thickness and drilling pattern, which keeps the warranty intact. An aftermarket hinge with a different cup bore will technically fit but voids the cabinet warranty and shortens the door’s life.
- Particleboard and MDF box construction swelling at the base. Arlington’s slab-on-grade homes put cabinet toe kicks close to a foundation that takes on moisture during spring rains. When the bottom edge of a KraftMaid box wicks water, the particleboard swells and the drawer glides bind. We cut out the damaged base, replace it with a sealed plywood base, and rehang the cabinet – replacing the whole run is rarely necessary.
- Drawer glide tracks on the Marquis series accumulating grit. The undermount glide used across Marquis drawers collects flour and construction dust over a decade of cooking. The drawer starts to feel rough and eventually sags. We clean and re-lubricate with a dry-film product made for the glide, and replace worn glides with the OEM part number when cleaning isn’t enough.
- Finish checking and yellowing on white and off-white painted doors facing south or west windows. Arlington’s afternoon sun degrades a clear topcoat faster than KraftMaid’s warranty literature suggests. We refinish with a water-based conversion varnish that blocks UV, or spec a factory-touch-up kit for smaller areas, so the finish color stays close to what left the factory.
None of this is a knock on the brand. It’s what happens to any wood cabinet in a climate that swings from humid to dry twice a year. Knowing the specific failure mode is what tells us whether a fix or a replacement is the right call.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our KraftMaid Kitchen Remodeling Process
A KraftMaid kitchen remodel in Arlington follows a documented sequence so the customer knows exactly what they’re paying for and when.
- 1
On-site assessment and photo record. We photograph every cabinet box, door, and drawer front, measure the layout to the sixteenth, and note substrate conditions, existing plumbing rough-in, and the electrical panel capacity. The customer gets a copy of that photo record, not just a walkthrough and a promise.
- 2
Written scope and flat price. Before any tools come out, we hand over a written scope and a flat price, line by line – demolition, cabinetry, countertops, backsplash, trades. No “call for a quote.” No range that gets firmed up later. The number on the page is the number we work to.
- 3
Parts decision, OEM vs aftermarket, in writing. Where a KraftMaid part carries the cabinet warranty, we specify OEM. Where an aftermarket part is equal or better and doesn’t touch the warranty – like a Blumotion drawer glide alternative – we name it in the quote and let the customer choose.
- 4
Demolition, installation, and substrate check. We remove the old cabinetry, inspect the substrate and subfloor, address any moisture staining before new cabinets go in, and level the new boxes. KraftMaid cabinets need a true, level floor – a quarter-inch of slope shows up as a wonky backsplash line later.
- 5
Functional test and final walkthrough. Every door and drawer cycled dozens of times. Soft-close verified. Under-cabinet lighting on. Countertop seams checked against natural light. The customer walks through with us and signs off on the punch list.
- 6
Written warranty and documented handoff. The customer leaves with a written warranty, a photo record of what was found and what was installed, and the 365-Day Done Right Promise: if it isn’t right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat KraftMaid Kitchen Remodeling Costs in Arlington

Here are the ranges we quote in Arlington, drawn from real jobs in the ZIP codes we work. These are flat prices with a written scope, not estimates that float.
| Full Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| KraftMaid Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What moves the number: the cabinet line specified (Vantage and Marquis sit at different price points), countertop material (a Cambria quartz surface costs more than a laminate but holds up better in a busy Arlington kitchen), whether the layout moves a wall or a sink line, and whether the existing electrical panel can carry additional circuits. Change orders are signed before any work proceeds on a change, which is how our projects finish within a few percent of the agreed price.
Call (844) 761-7521 for a free estimate. Bring a competitor’s written quote and we’ll review it line by line at no charge.
Why Arlington Homeowners Call Rowan Construction Group Arlington for KraftMaid Work
KraftMaid cabinet decisions – which line, which hinge, which drawer glide, which touch-up finish – require someone who has installed and repaired the brand enough times to know the difference. Our technicians have up to 19 years of experience, and they work on KraftMaid, Wellborn, and the Cambria and Caesarstone countertops that sit on top of it.
Under Clause 1 of the Haven Standard, the price is written before anyone starts. Under the 365-Day Done Right Promise, if something isn’t right, we make it right. We’re licensed and insured, our crews are background-checked and uniformed, and a live person answers calls 24/7. Every visit includes a documented photo record. We also handle Kohler fixtures, GAF roofing, PGT windows, and Master Halco fencing when a project reaches beyond the kitchen.
FAQs

Not if the work is done the right way. KraftMaid’s cabinet warranty covers the cabinet itself – the box, doors, and hardware as installed at the factory. Modifications that don’t touch the cabinet (countertops, backsplash, flooring, paint on the walls) don’t affect it. Replacements of hardware, like a hinge or glide, should use the OEM part KraftMaid specifies to keep the warranty intact. We name the part number in the written scope so there’s no gray area. Call (844) 761-7521 for a free estimate on your KraftMaid kitchen.
Yes, in most cases, if the line is still in production or there’s a documented successor part. KraftMaid’s Vantage and Marquis lines have the widest parts availability because they’re the highest-volume series. Older or discontinued lines may require a match from the current series; we check the exact model number and production date from the cabinet label inside the door before we quote so we’re not quoting a part that can’t be sourced. Call (844) 761-7521 and have the cabinet label ready.
Repair makes more sense when the boxes are solid and the failure is at the door, drawer, or hardware level – that’s most of what we see. Replacement makes sense when the particleboard box has swelled irreversibly, when the layout no longer works for how the homeowner cooks, or when the finish has failed across more than 30% of the doors. Our assessment photographs the condition of every box and door, and the written scope states the reason for either recommendation, so the customer can compare. Call (844) 761-7521 for a free bathroom and kitchen assessment.
Three to six weeks for a full remodel, depending on cabinet lead time and countertop fabrication. A cabinet-only installation runs five to ten working days. We schedule around Arlington’s permitting timelines and set the start date in writing. Call (844) 761-7521 for a written estimate with a projected schedule.
Yes, when the job requires one – moving plumbing, moving electrical, or structural changes to walls. Cosmetic work like a backsplash and cabinet refacing typically doesn’t require a permit under Arlington’s residential code, but the written scope tells the customer exactly which work will be permitted and inspected so nothing gets missed. Call (844) 761-7521 for a free estimate.
Written by the team at Rowan Construction Group Arlington, serving Arlington and nearby areas.












