







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Tub-to-Shower Conversion Cost in Arlington?
Tub-to-shower conversion in Arlington typically costs $3,500 to $10,000 for a full conversion, with most homeowners landing between $5,500 and $7,800 for a standard alcove swap using a tile surround and a Kohler or Toto fixture. A basic acrylic or fiberglass surround conversion runs $3,500 to $5,500, while a custom tile job with a built-in bench, niche, and frameless glass door pushes toward the top of the range at $8,000 to $10,000. The spread comes down to what’s behind the old tub: an Arlington home with a sound substrate and accessible plumbing is cheaper to convert than one where decades of moisture have softened the framing.

Key Takeaways
- Standard alcove tub-to-shower conversions in Arlington run $3,500 to $10,000, with a typical mid-range job at $5,500 to $7,800.
- Tub removal, rough-in plumbing changes, waterproofing, and finish materials drive most of the price.
- Arlington’s expansive clay soils and long hot summers can affect subfloor and moisture conditions behind the tub surround, which can add cost once demolition opens the wall.
- A written flat price before any work starts, with a signed change order for anything that changes, is how you keep the final number close to the agreed one.
- Free estimates and a free second opinion on any written estimate are standard with Rowan Construction Group.
Tub-to-Shower Conversion Cost Breakdown (2026)
Below is what each piece of a tub-to-shower conversion runs in Arlington this year. These are the line-item ranges we use when building a written quote, so you can compare them against any estimate you already have.
| Line item | Price range |
|---|---|
| Tub removal and haul-away | $200 – $550 |
| Rough plumbing changes (move or raise the drain/valve) | $400 – $1,800 |
| Subfloor and wall repair after demolition | $300 – $1,500 |
| Waterproofing membrane and backer board | $450 – $1,200 |
| Acrylic or fiberglass shower surround | $900 – $2,600 |
| Tile surround (ceramic, porcelain, or natural stone) | $1,200 – $3,800 |
| Functional shower valve and trim (Kohler, Toto, Moen) | $350 – $1,000 |
| Showerhead and hand-held fixture set | $120 – $450 |
| Shower pan, curb, and drain | $350 – $1,100 |
| Built-in bench or niche | $400 – $1,400 |
| Glass door and frame (framed or frameless) | $450 – $1,900 |
| Grab bars and safety hardware | $100 – $400 |
| Labor (demo through finish) | $1,200 – $3,000 |
| Permit fees (where required for plumbing changes) | $150 – $500 |
Add the pieces up and you see how a $3,500 job becomes a $10,000 one. The low end is a straight alcove swap into an existing footprint with an acrylic base and a functional valve. The high end is a full tile surround, a relocated drain, a built-in bench and niche, frameless glass, and a plumbing rough-in that turned up more work once the tub came out. The material choice for the surround and the glass door alone can swing a job by $3,000. If you want to compare against a full bathroom remodel, our bathroom remodeling in Arlington page lays out how a conversion fits into a larger scope.

What Affects Tub-to-Shower Conversion Pricing in Arlington
- What’s behind the tub wall. Arlington homes built in the 1970s and 1980s, common in neighborhoods like Fielder Park and Woodbrook, often have drywall rather than a proper waterproofed backer where the tub met the wall. Once we open it, we can see whether the framing and substrate are sound or whether moisture has reached them. That inspection drives a big share of the cost swing.
- Substrate and moisture condition. North Texas swings between humid summers and dry winters, and a tub surround that’s been caulked over repeatedly can hide slow leaks. A firm, dry substrate means a straightforward install. A soft one means framing repair, blocked costlier than a finish upgrade.
- Plumbing relocation. If you keep the drain and valve where they are, you save the rough-in line. If you want the showerhead higher, the valve moved to the side wall, or the drain centered for a linear style, the plumbing change adds cost and may require a permit. Moving the drain or valve beyond the original footprint is where budgets often climb.
- Surround material. Acrylic and fiberglass are the budget pick and install fast. Porcelain tile, ceramic, and natural stone cost more in material and labor because of layout, cutting, grout, and curing. For the full range of walk-in options and how they compare, our walk-in shower installation in Arlington guide covers the styles side by side.
- Glass and door type. A framed sliding door sits near the bottom of the glass line. A frameless door with heavier glass and precision hardware sits near the top. The look is different and so is the price.
- Accessibility additions. Grab bars, a low curb, a seat, and a hand-held showerhead add modest cost but matter for a homeowner planning ahead or supporting an older family member. These are usually the highest-value upgrades per dollar in the whole scope.
- Permits and code. A like-for-like conversion with no drain or valve move often doesn’t need a plumbing permit. A change that relocates the drain or adds a new supply connection triggers one in the city, and the fee plus inspection time runs $150 to $500. We pull the permit when it’s required and put it in the written scope so there are no surprises.
How to Save on Tub-to-Shower Conversion
You don’t need to spend the top of the range to get a conversion that lasts. A few choices move the number in your favor without sacrificing the parts that matter.
- Keep the plumbing where it is. If your current drain and valve work and the layout is comfortable, leaving them in place cuts the rough-in line and often the permit too. Save the relocation for a job where the layout is genuinely wrong.
- Mix materials deliberately. A porcelain tile that looks like stone on the walls, paired with a standard acrylic base, gives you a premium look at a mid-range price. The base is the part you mostly don’t see; the wall tile is the part you do.
- Choose a framed or semi-frameless door. The frameless door is the showpiece, but a clean semi-frameless or framed door saves $500 to $1,200 and holds up identically in daily use.
- Add value items instead of upgrades. Spend the money you save on grab bars, a niche, or a better showerhead. These raise daily comfort more than a heavier glass panel does.
- Get the written price before you decide. A flat written quote with a clear scope is the cheapest way to avoid mid-project surprises. Call (844) 761-7521 for a free estimate, and if you already have a written estimate from another contractor, we’ll review it line by line at no charge as a free second opinion.
Tub-to-Shower vs. Walk-In Shower vs. Shower Replacement
Arlington homeowners often ask which option fits their situation and budget. A tub-to-shower conversion replaces an existing tub with a shower in the same footprint, which keeps plumbing and space planning simple. A walk-in shower installation can involve a larger footprint, a curbless design, or a bench and runs $4,500 to $12,000. A shower replacement swaps an existing shower for a new one and starts lower, at $3,000 to $8,500, because the tub removal scope and drain work are already done. If your current shower is failing but the layout works, the shower replacement in Arlington page is the closer comparison.
What to Expect During the Conversion
Most tub-to-shower conversions take three to six working days from demo to final trim. The sequence rarely changes: we protect the floors and set up dust control, remove the tub and surround, open the wall to inspect the substrate and plumbing, make any framing or rough-in repairs, install and waterproof the shower base and walls, tile or set the surround, install the valve and fixtures, hang the glass, and clean up. Every visit ends with a documented photo record so you can see exactly what we found behind the wall and what we did about it. Our technicians have up to 19 years of experience, and they know what an Arlington tub wall typically looks like before the first panel comes off.
Why Arlington Homes Need a Closer Look Before Pricing
Arlington’s climate and building stock put a particular stamp on conversion work. The region’s clay soils shift with wet and dry cycles, and that movement can show up as hairline cracks in tile and grout and as gaps at the tub-to-floor seam, which let water in over time. In neighborhoods north of I-30 and around the Entertainment District, where a lot of the housing went up in the 1980s and 1990s, we regularly find original drywall behind a tub that was caulked shut for years. In older areas like Central Arlington, the cast-iron drain lines can be pitted, which matters when you’re tying in a new shower drain. None of this is unusual for Arlington, but it’s the reason a written price built from a real inspection beats a phone estimate every time. Our Arlington service area page lists the neighborhoods and trades we cover.
How to Read a Tub-to-Shower Conversion Quote
A good quote is itemized enough to compare and firm enough to trust. It should name the surround material and brand, the shower valve and fixture brand, whether the glass is framed or frameless, whether a bench and niche are included, whether the permit is pulled, and what happens if the wall is soft once it’s open. Under Clause 1 of The Haven Standard, the price is written before anyone starts, and no change proceeds until the change order is signed. That discipline is why our projects land within a few percent of the agreed cost across 4,000-plus jobs. If a quote you’re holding is vague on any of these points, the free second opinion is the fastest way to find out where the gaps are.
FAQs – Tub-to-Shower Conversion Cost
How much does a tub-to-shower conversion cost in Arlington?
A tub-to-shower conversion in Arlington costs $3,500 to $10,000, with most homeowners paying $5,500 to $7,800 for a standard alcove conversion with a tile surround. The final number depends on what’s behind the tub wall, whether the plumbing moves, and the glass door you choose. Call (844) 761-7521 for an exact written quote; estimates are free.
Is it cheaper to convert a tub to a shower or remodel the whole bathroom?
A tub-to-shower conversion is cheaper. A conversion runs $3,500 to $10,000, while a full bathroom remodel in Arlington runs $9,000 to $28,000 and a small bathroom remodel runs $5,000 to $12,000. If the sink, vanity, flooring, and layout are sound, converting just the tub is the lower-cost way to modernize the room. Call (844) 761-7521 to talk through which scope fits your bathroom.
Do I need a permit for a tub-to-shower conversion in Arlington?
A like-for-like conversion with no drain or valve move often doesn’t require a plumbing permit, but moving the drain, relocating the valve, or adding a new supply line does. Permit fees run $150 to $500 plus inspection time. We identify whether a permit is required during the estimate and include it in the written scope. Call (844) 761-7521 to schedule a free estimate.
How long does a tub-to-shower conversion take?
Most conversions take three to six working days from demolition to final trim. Jobs that uncover soft framing or require a drain relocation run longer, usually five to ten days. We tell you the expected timeline in the written quote so you can plan around it. Call (844) 761-7521 for a free estimate and a clear schedule.
Can you match my existing bathroom tile during a conversion?
In many cases yes, and where an exact match isn’t available, a coordinated complementary tile keeps the room looking intentional. We’ll show you the tile and finish options in the written scope before any work begins, so you know exactly what you’re getting. Call (844) 761-7521 for a free estimate and a chance to review the material list.
Get a Written Price Before Any Work Starts
A conversion is a straightforward job once you can see the number in writing. We quote a flat written price with a written scope and a written warranty, backed by the 365-Day Done Right Promise: if it isn’t done right, we make it right. Our crews are background-checked and uniformed, calls are answered by a live person 24/7, and every visit includes a documented photo record as standard. If you’re ready to convert the tub in your Arlington bathroom, call (844) 761-7521 for a free estimate and a flat written price before anyone picks up a tool. You can also start on our home page to see the other trades we handle under The Haven Standard.
Written by the team at Rowan Construction Group.
Pricing reflects the Arlington market as of 2026. Rowan Construction Group Arlington offers free estimates – call (844) 761-7521.
What Our Customers Say
"They found an old septic line under the driveway run and stopped, documented it, and re-quoted before continuing."
- Xavier L."Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R."Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F.












