







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCountertop Installation Cost in Arlington, TX: What You’ll Actually Pay
Countertop installation in Arlington typically runs $2,000-$6,500 for a standard kitchen, with quartz landing at $55-$100 per square foot installed and laminate at $20-$35 per square foot installed. The range is wide because the price depends on material, square footage, seam layout, and - in Arlington’s older stock - how far out of square your kitchen walls actually are. Call (844) 761-7521 for a written, flat price before any measurement or work begins; estimates are free and the number comes back to you in writing.
That last point matters more here than in most cities. A 1970s ranch in north Arlington with shimmed base cabinets and a back wall 3/8 of an inch out of square over a 10-foot run will not accept a countertop cut from a tape-measure template. It has to be laser measured, and the template file has to reach the fabricator before anyone commits to an install date.

Why Countertop Quotes in Arlington Go Sideways
Most countertop price surprises in Arlington aren’t about the slab. They’re about geometry. The city’s housing was overwhelmingly built between 1950 and 1990, and the pier-and-beam foundations under those single-story brick ranches move with the clay soils that shrink and swell through DFW’s wet and dry cycles. Floors go out of level. Cabinets get shimmed to compensate. Walls drift out of plumb. The result is a kitchen that looks square to the eye and is anything but square when you measure it.
When a template is taken by tape measure and the fabricator cuts to those numbers, the slab arrives and doesn’t fit. That triggers a remake, and a remake costs $400-$800 in material and labor on top of the original job, plus a schedule slip that can run two to three weeks. That remake cost is not in most quotes you’ll collect in Arlington. It should be planned for, not discovered.
Under Clause 1 of The Haven Standard, no countertop job at Rowan Construction Group Arlington gets a firm install date until the digital laser template is taken and the file is delivered to the fabricator. The measurement happens before the price is finalized, not after.
Countertop Material Costs in Arlington, Priced by the Square Foot
Square footage here is calculated from your actual kitchen dimensions, not a per-linear-foot shortcut that hides the real total. Here’s what each material runs installed:
| Material | Installed Cost per Sq Ft | Notes |
|---|---|---|
| Laminate | $20-$35 | Lowest entry point; fewer seam constraints on long runs |
| Granite | $45-$75 | Price depends on slab grade; natural variation per slab |
| Caesarstone quartz | $55-$85 | Engineered, consistent color, non-porous |
| Cambria quartz | $70-$100 | Premium engineered line; wider color range |
A typical Arlington kitchen runs 30-50 square feet of countertop surface, which is why the all-in project lands at $2,000-$6,500. Add a sink cutout and plumbing reconnection and the scope grows by $150-$300 - and in pre-1980 homes where galvanized supply lines are still in the wall, that reconnection requires a licensed plumber. Rowan names it as a separate line item in the written quote rather than burying it in the labor total.

Seams, Sinks, and the Line Items You Should See in Writing
Quartz slabs are typically 55-60 inches wide. Any counter run longer than that needs a seam, and where that seam lands is a design decision, not an installation detail. In an Arlington galley or L-kitchen, the seam decision affects both how the counter looks and how the material wears over the next decade.
A written countertop quote from Rowan Construction Group Arlington names three things before fabrication starts:
- The seam location. Which run it falls on and how far it sits from the sink or cooktop.
- The seam type. Mitered, butt-jointed, or waterfall, spelled out in inches.
- The overhang support. Where a bracket or corbel is needed and whether the substrate under the slab is new or existing.
You see the layout decision on paper before anyone cuts stone. That’s a different process from quoting per linear foot and letting the fabricator figure out the rest at the saw. If you’re pairing countertops with new cabinetry, the same discipline applies to Kitchen Remodeling, where cabinet installation runs $4,000-$13,000 and countertops are quoted as a separate, itemized scope.
Templating and Warranty: What Holds Up After the Crew Leaves
On a pier-and-beam home with ongoing minor floor movement, three things tend to fail within the first year of a countertop install: seam integrity, overhang support, and substrate adhesion. Those are exactly the items covered in writing by the 365-Day Done Right Promise. If a seam opens or a bracket sags in that window, Rowan makes it right rather than sending a bill.
The template step is what protects all three. A digital laser measure captures the deviation from wall to wall and hands the fabricator a file that accounts for the shimmed cabinets and the 3/8-inch drift, so the cut matches the room. Under the Haven Standard, every visit also includes a documented photo record as a standard deliverable - you get pictures of the substrate condition and the finished install, not a verbal “all set.” Technicians are background-checked and uniformed, and calls are answered by a live person 24/7, which matters when a leak shows up under the sink on a Sunday.
Bring a competitor’s written estimate and Rowan will review it line by line at no charge. Seeing whether the other quote names seam location, plumbing reconnection, and substrate prep tells you a lot about what the final bill will look like. Prefer to compare against the full scope? The home services overview lays out how countertops fit into a larger kitchen project.
Frequently Asked Questions
Countertop installation in Arlington runs $2,000-$6,500 for a standard kitchen, depending on material and square footage. Quartz lands at $55-$100 per square foot installed, granite at $45-$75, and laminate at $20-$35. Call (844) 761-7521 for an exact quote - the written price is free and arrives before any work starts.
Replacing is usually cheaper than repairing once a countertop has cracked or delaminated, because repair rarely restores the material’s integrity and often costs $300-$600 with no lasting result. If the substrate and cabinets are sound, a new slab is the better spend. Call (844) 761-7521 and we’ll tell you which side of that line you’re on.
No. Templating and installation are two separate steps, because the fabricator needs the digital template file before cutting. In most Arlington jobs the template happens on one visit and install follows once the slab is cut. Call (844) 761-7521 and we’ll give you the real dates in writing.
Yes, whenever supply lines are being replaced or your home is pre-1980 with galvanized plumbing, a licensed plumber is required. That reconnection adds $150-$300 and appears as a named line item on Rowan quotes, not a surprise on install day. Call (844) 761-7521 to get the full scope quoted upfront.
Get the Number in Writing Before Anyone Measures
Countertop pricing in Arlington comes down to three numbers: your square footage, your material, and how far out of square the room actually is. We put all three in a written quote with a flat price, a written scope, and a written warranty. Call (844) 761-7521 for a free estimate and a laser template before the first cut is scheduled.
Written by the team at Rowan Construction Group Arlington, serving Arlington, TX.
What Our Customers Say
"They found an old septic line under the driveway run and stopped, documented it, and re-quoted before continuing."
- Xavier L."Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R."Fence and retaining wall along a sloped boundary. They photographed the footing depth at each post, which mattered when the county inspector came."
- Iona F.












